Function Area Settings - IDEC SmartAXIS FT9Z-1A01 User Manual

5: S F
P ECI AL UN CTI ON S

Function Area Settings

Various special functions of the SmartAXIS are configured in the Function Area Settings of WindLDR PLC programming software.
From the WindLDR menu bar, select Configuration > Run/Stop Control.
The Function Area Settings dialog box is displayed.
Function Description
Run/Stop Control
Memory Backup
Input Configuration
5-2
Configure the following run/stop control settings.
Stop input

Reset input

Run/stop selection at memory backup error

Run/stop selection at power up

When the SmartAXIS starts running, device values in the RAM are kept or cleared. Configure the keep/
clear settings for the following devices.
Internal relays

Shift registers

Counters

Data registers

Configure the inputs to use special functions, such as the input filters or high-speed counters.
High-speed counter

Catch input

Interrupt input

Frequency measurement

Input filter

Analog input

Timer interrupt

S A XI S P
M AR T R O
/ L U ' M FT9Y-B 1378
I TE SER S ANUAL