IDEC SmartAXIS FT9Z-1A01 User Manual page 140

5: S F
P ECI AL UN CTI ON S
Programming WindLDR
Configure the communication format according to the communication specifications of the device.
1. From the WindLDR menu bar, select Configuration > Communication Ports.
The Function Area Settings dialog box is displayed.
In the Communication Mode pull-down list for the appropriate port, select the communication mode.
2.
The configuration dialog that corresponds to the communication mode is displayed.
Change the settings on the configuration dialog according to the communication format for the destination device.
3.
A user communication example is shown below.
Click OK.
4.
This concludes configuring the settings.
5-48 S A XI S P / L U '
M AR T R O I TE SER S
M FT9Y-B 1378
ANUAL