Smartaxis Environment Settings - IDEC SmartAXIS FT9Z-1A01 User Manual

6: HM I F
UN CTI ON

SmartAXIS Environment Settings

When the SmartAXIS is stopped, you can configure the menu language, internal clock, slave number, and the scroll unit/speed and
blinking speed for messages displayed with the message (MSG) instruction/FB. These cannot be configured while the SmartAXIS is
running.
Changing the Menu Language
When the SmartAXIS is stopped, you can change the menu language between Japanese, English, and Chinese. This cannot be
changed while the SmartAXIS is running. The menu language is set to English when the SmartAXIS is shipped from the factory, so
this section describes how to switch the language to Japanese.
On the standard screen, press the
1.
The system menu is displayed.
Select Configurations with the
2.
Run
Edit Program
External Memory
Configurations
Select Menu Languages and press the
3.
Function
Clock
Menu Languages
Backlight
Select Japanese with the
4.
Menu Languages:
Japanese
Selectable menu languages

The menu languages that can be selected are as follows.
English/Japanese/Chinese
Retaining the menu language setting

For system software version V2.20 and later, the menu language setting is retained in the ROM of the SmartAXIS. Even if the
backup battery is dead, it is not required to change the menu language again.
6-8
(ESC) + (OK) buttons.
(up) and (down) buttons and press the
(OK) button.
(down) button, and then press the
S A XI S P / L U
M AR T R O I TE
(OK) button to confirm.
' M FT9Y-B 1378
SER S ANUAL
(OK) button.