IDEC SmartAXIS FT9Z-1A01 User Manual page 83

Insert input I2 and XOR B1. Connect input I1 and I2 to the inputs 1 and 2 of XOR B1.
The output connector of the FB can be connected to multiple FB input connectors. Multiple output connectors of FBs cannot be
connected to a single input connector of an FB.
Insert special internal relay M8121, AND B2, and output Q1 and connect them.
Note: M8121 is a special internal relay that continuously turns on and off in a one second cycle. For details on the special internal relay, see "Special
Internal Relay Device Addresses" on page 7-2.
Creating the sample FBD program is now complete.
S A XI S P / L U '
M AR T R O I TE SER S
M FT9Y-B 1378
ANUAL
4: O B
P ER ATI ON ASI CS
4-11