IDEC SmartAXIS FT9Z-1A01 User Manual page 179

Configuring the Slave Number
When the SmartAXIS is stopped, you can configure the slave number used in maintenance communication or Modbus RTU
communication. This cannot be configured while the SmartAXIS is running.
1. On the standard screen, press the
Stopped
2012/OCT/10/WED
13:30:40
The system menu is displayed.
Select Configurations with the
2.
Run
Edit Program
External Memory
Configurations
Select Function with the
3.
Function
Clock
Menu Languages
Backlight
Select Communications with the
4.
Communications
Message Settings
Select Slave Number with the
5.
Slave Number
The port selection screen is displayed.
Select Port 2 with the
6.
For example, change the slave number of the port 2 to 1.
Port 2:
0
Port 3:
0
Specify 1 with the
7.
Port 2:
1
Port 3:
0
Selectable slave numbers

The slave numbers that can be selected are as follows.
Port 2 Port 3
0 to 255 0 to 255
(ESC) +
(up) and
(up) and (down) buttons and press the
(up) and
(up) and
(up) and (down) buttons and press the
(up) and (down) buttons and press the
S A XI S P
M AR T R O
(OK) buttons.
(down) buttons and press the
(down) buttons and press the
(down) buttons and press the
(OK) button.
(OK) button.
/ L U ' M FT9Y-B 1378
I TE SER S ANUAL
6: HM I F
(OK) button.
(OK) button.
(OK) button.
(OK) button.
UN CTI ON
6-11