Table of Contents
Advertisement
3: I
N STALLATI ON AN D
Direct Mounting on Panel Surface
This section describes how to mount the SmartAXIS directly onto a mounting plate for installation in a control panel. The 12- and
24-I/O types are mounted differently from the 40- and 48-I/O types. To mount the SmartAXIS directly, it may be necessary to
make holes in the mounting plate depending on the SmartAXIS model.
Preparations
When directly mounting the 12- and 24-I/O types, pull out the direct-mounting plate and the DIN rail clamp on the back of the
SmartAXIS, and attach the SmartAXIS to the mounting plate using the screw holes. Attach the 40- and 48-I/O types to the
mounting plate using the screw holes on the back of the SmartAXIS.
Direct-mounting Plate
3-4
W
I R I N G
DIN Rail Clamp
S
A XI S P
M AR T
/ L
U
'
M
FT9Y-B 1378
R O
I TE
SER
S
ANUAL
Screw Hole
Advertisement
Table of Contents
Troubleshooting
