Maintaining The Sd Memory Card - IDEC SmartAXIS FT9Z-1A01 User Manual

Maintaining the SD Memory Card

Access to the memory card inserted into the SmartAXIS can be stopped while the SmartAXIS is running or stopped. The memory
card inserted into the SmartAXIS can also be formatted while the SmartAXIS is stopped. The memory card cannot be formatted
while the SmartAXIS is running.
Stopping Access to the SD Memory Card
This section describes how to stop the access to the SD memory card with the button operations on the SmartAXIS.
1. On the standard screen, press the
Running
2012/OCT/10/WED
13:30:40
The system menu is displayed.
Select External Memory with the
2.
When the SmartAXIS is running
Stop
External Memory
Device Monitor
Program Monitor
Select SD Card with the
3.
Memory Cartridge
SD Card
Select Stop Access with the
4.
Stop Access
Format
Select Yes with the
5.
Do you want to stop
SD card access?
No
Yes
While the access to the SD memory card is being stopped, the screen below is displayed. When stopping the access is finished,
6.
the screen in step 4 is displayed.
Notes:
Set the write-protect switch on the SD memory card to insert into the SmartAXIS module to the off position.

Insert and remove the SD memory card in the direction indicated on the SmartAXIS.

Do not remove the SD memory card while the access to it is being stopped. There is a risk of damage to the SD memory card and the data

stored on it. Check that the SD memory card access LED is off before removing the SD memory card from the SmartAXIS.
(ESC) +
(up) and
When the SmartAXIS is stopped
Run
Edit Program
External Memory
Configurations
(up) and (down) buttons and press the
(up) and (down) buttons and press the
(down) button and press the
S A XI S P
M AR T R O
(OK) buttons.
(down) buttons and press the
(OK) button.
/ L U ' M FT9Y-B 1378
I TE SER S ANUAL
6: HM I F
(OK) button.
(OK) button.
(OK) button.
UN CTI ON
6-25