IDEC SmartAXIS FT9Z-1A01 User Manual page 166

5: S F
P ECI AL UN CTI ON S
Programming WindLDR
From the WindLDR menu bar, select Configuration > Connection Settings.
1.
The Function Area Settings dialog box is displayed.
Select Communication Mode for the connection to use.
2.
Configure the communication mode allocated to a maximum of three connections that can be used as client or server. Each
connection can be set to a different port number. Set connections that are not used to Unused.
Select Maintenance Communication Server.
3.
The Maintenance Communication Server dialog box is displayed.
4. Specify the parameters.
Click OK.
This concludes configuring the settings.
5-74 S A XI S P / L U '
M AR T R O I TE SER S
M FT9Y-B 1378
ANUAL