IDEC SmartAXIS FT9Z-1A01 User Manual page 95

Communication Ports Configure the communication ports for the SmartAXIS to communicate with external devices equipped
with RS232C or RS485 ports.



Cartridges Downloads the user program in a memory cartridge to the SmartAXIS module's ROM.
LCD Settings Configure the LCD settings for the SmartAXIS.



Device Settings Configure the order to store the upper and lower words for 32-bit data.
Program Protection Applies the protection to the user program by configuring a password so unauthorized users cannot
inadvertently upload or download it.
Self Diagnostic Configure the watchdog timer monitoring the operating status of the SmartAXIS.
Calendar & Clock The SmartAXIS is equipped with an internal clock and its calendar data (year, month, day, day of the
week) and clock data (hour, minute, second) can be used in user programs. Daylight savings time can
also be configured for the internal clock.
Network Settings Configure the network settings to connect the SmartAXIS to the network using the Ethernet port.
Connection Settings Configure server/client communication used by the SmartAXIS Ethernet port.




Maintenance communication
User communication
Modbus RTU master/slave
Backlight ON Time
Monitoring Ladder Program
Message Settings
Maintenance communication server
User communication server/client
Modbus TCP communication server/client
Remote I/O master
S A XI S P / L
M AR T R O
U ' M FT9Y-B 1378
I TE SER S ANUAL
5: S F
P ECI AL UN CTI ON S
5-3