IDEC SmartAXIS FT9Z-1A01 User Manual page 4

Regarding laws and compatible standards
This product adheres to the laws and compatible standards of all countries involved, as shown below.
European laws and standards
This product complies with the following EU directives.
Low Voltage Directive (Directive 2006/95/EC)

EMC Directive (Directive 2004/108/EC)

RoHS Directive

To comply with these directives, this product has been designed and evaluated on the basis of the following international and
European standard.
IEC/EN 61131-2: 2007 (excluding the Lite digital I/O status indicators)

EN IEC 63000

For details on the compatible standards and EU Directives, contact the distributor from which you purchased this product or visit our web site.
North America laws and standards
This product complies with the following standards.
UL508

CSA C22.2 No.142

ANSI/ISA 12.12.01

CAN/CSA C22.2 No.213

Marine standards
This product is certified by the following classification societies. (FT1A Version V130 or later, system software version V2.10 or
later)
- ABS (American Bureau of Shipping)
- DNV
(Det Norske Veritas)
- LR (Lloyd's Register)
- NK (Nippon Kaiji Kyokai)
To use this product as a marine certified product, wrap the power supply cable (excluding the earth wire) and the Ethernet communication cable

connected to the SmartAXIS around a ferrite core (TDK ZCAT3035-1330) twice.
Wrap cables connected to the communication cartridge around a ferrite core (TDK ZCAT1730-0730) twice.

This product is not certified for use on the bridge and deck.

Under no circumstances shall IDEC Corporation be held liable or responsible for indirect or consequential damages resulting from
the use of or the application of IDEC PLC components, individually or in combination with other equipment.
All persons using these components must be willing to accept responsibility for choosing the correct component to suit their
application and for choosing an application appropriate for the component, individually or in combination with other equipment.
All diagrams and examples in this manual are for illustrative purposes only. In no way does including these diagrams and
examples in this manual constitute a guarantee as to their suitability for any specific application. To test and approve all
programs, prior to installation, is the responsibility of the end user.
Preface-3
IMPORTANT INFORMATION
S A XI S P / L U '
M AR T R O I TE SER S
M FT9Y-B 1378
ANUAL