Monitoring The Smartaxis - IDEC SmartAXIS FT9Z-1A01 User Manual

Monitoring the SmartAXIS

Monitoring Device Values
You can check device values on the SmartAXIS. When you switch the SmartAXIS to the device monitor mode from the standard
screen, you can check device values, but you cannot modify them. To modify device values, run Device Monitor on the system
menu. Device values can be monitored regardless of the SmartAXIS operating status (run/stop). This section describes the device
monitor mode when the SmartAXIS is running.
1. If you press the (left) and
and the device values can be monitored. Continue to press the
R 0123456789
010 ,
R 0123456789
020 ,
R
0123456789
030 ,
R
0123456789
The device type changes in the order below.
I  Q  T  TC  TP  C  CC  CP  D (Data Register)  D (Special Data Register)  M (Internal Relay)  M (Special
Internal Relay)  R
2. Press the (up) and
The device numbers change.
Modifying Device Values
This section describes how to specify a device and modify that device value.
Modifying a Bit Device Value
This section describes an example of switching on M0012 while the SmartAXIS is running.
1. On the standard screen, press the
Running
2012/OCT/10/WED
13:30:40
The system menu is displayed.
Select Device Monitor with the
2.
The SmartAXIS switches to the Device Monitor mode.
Stop
External Memory
Device Monitor
Program Monitor
Select device type: M (internal relay) with the
3.
0 flashes to indicate the focus is on M0000.
0000 ,
M 01234567
0010 ,
M 01234567
0020 ,
M 01234567
0030 ,
M 012345
(right) buttons on the standard screen, the SmartAXIS switches to the device monitor mode
Running
2012/OCT/10/WED
13:30:40
(down) buttons.
Shows the on/off state of the inputs (I).
Inverted inputs are on state.
(ESC) + (OK) buttons.
(up) and (down) buttons and press the
(left) and
S A XI S P / L
M AR T R O
(left) and
(right) buttons and press and hold the
U ' M FT9Y-B 1378
I TE SER S ANUAL
6: HM I F
(right) buttons to change the device type.
0000 ,
I 01234567
0010 ,
I 01234567
0020 ,
I 01234567
0030 ,
I 01234567
(OK) button.
(OK) button.
UN CTI ON
6-15