IDEC SmartAXIS FT9Z-1A01 User Manual page 46

2: P S
R ODUCT P ECI FI CATI ON S
After removing the memory cartridge cover, install a memory cartridge. Confirm that the triangular marks on the memory cartridge
and on the SmartAXIS point at each other to ensure that the memory cartridge is installed with the correct orientation.
Removal Procedure
As in the procedure to remove the memory cartridge cover, insert a flat head screwdriver under the memory cartridge cover and
pull the cover directly upward to remove it. If the cartridge is removed in a crooked state, the housing of the cartridge or the
internal connector may be damaged.

Caution

2-26
Ensure that the cartridge is installed with the correct orientation.
Turn off the power to the SmartAXIS before removing or installing a memory cartridge.
If a memory cartridge is installed while the SmartAXIS is powered, the SmartAXIS or the memory cartridge may be
damaged.
Do not damage the SmartAXIS with the screwdriver.
S A XI S P
M AR T R O
Memory Cartridge
/ L U ' M FT9Y-B 1378
I TE SER S ANUAL