IDEC SmartAXIS FT9Z-1A01 User Manual page 304

12: R I / O
EM OTE
Remote I/O Slave Operation and Restrictions
The remote I/O slave outputs conform to the remote I/O master outputs. Therefore, the following restrictions are applied when
the SmartAXIS operates as a remote I/O slave.
Special internal relays
Communication settings
Maintenance
Communication
12-10
All Outputs OFF (M8002)
Maintain Outputs While CPU Stopped
(M8025)
Serial communication port
Ethernet Communication
Access to devices
Forced I/O function
Data File Manager
S A XI S P
M AR T R O
Cannot be used.
Cannot be used.
The communication mode is always "Maintenance Communication". The
communication settings are fixed as the following settings.
Baud rate: 115,200 bps
Data length: 7 bits
Parity: Even
Stop bits: 1 bit
Cannot be used except for remote I/O communication.
Output relay (Q) on/off state cannot be changed.
Other devices can be read and written to normally.
Cannot be used.
Cannot be used.
/ L U ' M FT9Y-B 1378
I TE SER S ANUAL