IDEC SmartAXIS FT9Z-1A01 User Manual page 181

Select IP Address with the
6.
Network Settings
DHCP: OFF
IP Address:
192.168. 1.
Specify 6 with the
7.
IP Address:
192.168. 1.
8. Press (ESC) button to set the network settings, and then select Yes with the
button.
Do you want to
configure network?
No
Yes
The IP address is set to 192.168.1.6.
Network settings configuration range

The network settings configuration range is as follows.
DHCP
ON/OFF
Notes:
When DHCP is enabled, the network settings are automatically obtained and cannot be manually configured.

You can monitor the current network settings from Status Monitor.

Modifying the Function Settings
Modifying the Scroll Speed
While the SmartAXIS is stopped, you can configure the scroll speed for messages displayed with the message (MSG) instruction/FB.
This cannot be configured while the SmartAXIS is running.
In step 4 of Configuring the Slave Number, select Message Settings and press the
1.
Communications
Message Settings
Select Scroll Settings with the
2.
Scroll Settings
Blink Settings
Select Scroll Speed with the
3.
Scroll Speed:
500 ms
Scroll Unit:
1-character
(up) and (down) buttons and press the
5
(up) and (down) buttons and press the
6
IP Address Subnet Mask
000.000.000.000 to 000.000.000.000 to
255.255.255.255 255.255.255.255
(up) and
(up) and (down) buttons and press the
S A XI S P
M AR T R O
(OK) button.
Default Gateway
000.000.000.000 to
255.255.255.255
(down) buttons and press the
/ L U ' M FT9Y-B 1378
I TE SER S ANUAL
6: HM I F
(OK) button.
(down) button and press the
(OK) button.
(OK) button.
(OK) button.
UN CTI ON
(OK)
6-13