Rep 3.10 Scan Output Drive Roller; Rep 3.11 Scan Output Drive Pulley - Xerox Telecopier 7017 Technical Reference Manual

REP 3.10 Scan Output Drive
Roller
Parts List on PL 3.3
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove RH cover (REP 1.2).
4. Remove coupler cover (REP 1.3).
5. Remove LH cover (REP 1.4).
6. Remove video assembly (REP 3.7).
7. Remove scan output drive roller.
a. Remove scan output drive belt.
b. Remove the three E-rings on the scan
output drive roller.
c. Remove scan output drive roller and
brass bearing from RH frame.
d. Remove scan output drive pulley
from scan output drive roller.
e. Remove scan output drive roller and
plastic bearing from LH frame.
f. Remove bearings from scan output
drive roller.
Replacement
Reinstall in reverse order.
Telecopier 7017 / 7017SF
REP 3.11 Scan Output Drive
Pulley
Parts List on PL 3.3
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove coupler cover (REP 1.3).
4. Remove LH cover (REP 1.4).
5. Remove speaker assembly (REP 5.2).
6. Remove scan output drive pulley.
a. Remove scan output drive belt.
b. Remove E-ring securing scan output
drive pulley.
c. Remove scan output drive pulley.
Replacement
Reinstall in reverse order.
12/88
4-21
www.printcopy.info
REP 3.10, 3.11