Connecting To An Rm / Btc - Pepperl+Fuchs VisuNet Control Center 6 Manual

VisuNet Control Center 6
"How Tos"
8.2

Connecting to an RM / BTC

Goal
Add an RM / BTC to a VisuNet CC project.
Adding an RM / BTC
1.
Add RM / BTC to the list of available devices
2.
Open search window by clicking "Scan for Remote Monitors".
3.
Close window by clicking "OK". All RMs / BTCs that have been found will be added to the list of
devices.
Figure 8.1
4.
Click on the RM / BTC you want to connect to in device list.
5.
To initiate the connection to an RM / BTC, enter the PFAdmin Windows password that has been
set during the First Start Wizard of the RM Shell 6.
Scanning for RMs / BTCs
Caution!
Password security
Use strong passwords for the user roles "engineer" and "administrator" on the
RMs / BTCs to ensure a high level of security!
Note
To avoid recurring authentications, the connection password can be stored
encrypted in the Control Center project.
71