Main Structure (User Interface) - Pepperl+Fuchs VisuNet Control Center 6 Manual

Table of Contents

VisuNet Control Center 6

VisuNet CC Setup

5.1

Main Structure (User Interface)

To find all your devices in the network, use the "Scan for Remote Monitors" icon.

Figure 5.3

All online devices, Remote Monitors and Box Thin Clients are listed.

Note

If your device is not listed, you can use the "Add Device" function and add a device manually by

stating the IP address.

Figure 5.4

VisuNet CC's user interface is divided into three main sections:

Figure 5.5

VisuNet CC Settings

Tabbed toolbars: In the toolbar the following tabs can be selected:

File: Click the "File" tab in the top-left corner of the VisuNet CC screen to enter the

file view.

Options:

Select "Options" from the navigation bar to adjust VisuNet CC settings. The following

settings can be adjusted:

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the VisuNet Control Center 6 and is the answer not in the manual?