Pepperl+Fuchs VisuNet Control Center 6 Manual page 27

VisuNet Control Center 6
Manage (Home)
Figure 6.14
Category
Communication Status
Write Filter
RM Shell Version
OS Version
Disk Space
License Status
3.
Click "Next".
4.
In the summary recheck your selections and click "Execute" to proceed further.
Select your target device
Description
Offline
Write Filter is enabled. Please
deactivate the write filter.
Incompatible RM Shell Ver-
sion.
Unsupported OS Version.
Please download the relevant
update for your OS.
Not sufficient storage avail-
able. Please use the Cleanup
Disk Wizard.
Checks if a valid VisuNet Con-
trol Center License is
assigned to the Device.
Troubleshooting
Make sure your device is
online.
Please refer to chapter
"Device Commands" to dis-
able the Write Filter by restart-
ing the device.
Refer to the RM Shell and
Image version in the Device
Status to check on your RM
Shell version. Use the correct
update, available online.
Refer to the Software informa-
tion in the About tile in your
RM Shell to check on which
Operating System your device
is based on.
Please use the Cleanup Wiz-
ard. If the storage after clean-
ing up the disk is still not
sufficient we recommend to
update your device with the
latest factory reset version
>6.0. This will adapt your par-
tition and increase the avail-
able storage.
Assign VisuNet Control Cen-
ter License
27