How Tos; Preparing An Rm / Btc For Centralized Management - Pepperl+Fuchs VisuNet Control Center 6 Manual

VisuNet Control Center 6

"How Tos"

8 "How Tos"
8.1

Preparing an RM / BTC for Centralized Management

Goal
Prepare an RM / BTC for centralized management.
Pre-conditions
Ensure, that the following criteria are fulfilled by the RM / BTC:
• Local time zone, date and time of RM / BTC are correct.
• RM / BTC has firmware version RM Shell 5 or newer.
• RM / BTC is connected to the same network as the PC with VisuNet CC.
• RM / BTC IP address and VisuNet CC IP address are in the same IP address range.
DHCP is enabled as factory default setting in everey RM / BTC.
• VisuNet CC interface is enabled in the RM Shell (= default setting).
• VisuNet CC license key is entered in RM Shell. The license key can also be entered via
VisuNet CC.
When all pre-conditions are fulfilled, the RMs / BTCs can be managed over the network by Vis-
uNet CC.
70