Device Backup - Pepperl+Fuchs VisuNet Control Center 6 Manual

VisuNet Control Center 6
Manage (Device)
7.5

Device Backup

Figure 7.38
Apply Image Wizard
Use the Apply Image wizard to apply multiple images to multiple devices.
Images that can be applied to the RM/BTC:
Image Type
1) Pepperl+Fuchs
Factory Reset Image
2) Backup Image
3) Clone Image
Follow the steps of the wizard that guides you through the process:
Description
Available for each specific device. The Pep-
perl+Fuchs default settings will be applied
back to your device. With Factory Reset 6.0
and newer the image won't be stored on the
device any more.
Caution! After applying the Pepperl+Fuchs
image the setup of the device needs to be per-
formed locally! The RM Shell first start wizard
will guide you through the most important ini-
tial configuration steps. Please refer to the
First Start Wizard Chapter in the RM Shell
Manual for further information.
Own captured Backup Image, which can only
be applied on the same device with the identi-
cal serial number. The backup image can be
used to restore a specific state of a device.
Note: VisuNet CC might not be able to find the
device when changes of the computer name
or the Network settings have been done after
capturing the image.
Own captured Clone Image, which can be
applied on devices with the same hard-
ware/same device type e.g. BTC12. Within the
clone image all applications as well as 3rd
party applications and the whole operating
system is cloned. By applying the cloned
image a generic Windows image is created,
which resets the name and generates a
unique ID.
Caution! The devices on which a clone image
is applied to, need to be configured locally.
The set up processes can not be performed
via VisuNet CC.
Note
Get in contact with
your local sales sup-
port
Has to be captured by
the customer in the
RM Shell Factory
Reset or via VisuNet
CC - Device Backup in
advance.
Has to be captured by
the customer via Vis-
uNet CC - Device
Backup in advance.
57