Pepperl+Fuchs VisuNet Control Center 6 Manual page 51

VisuNet Control Center 6
Manage (Device)
Tip
If you need to take control of the mouse, click the "control" item in the Session Shadowing
Mode.
Figure 7.32
Disable Touch
Disable the touchscreen of an RM, e.g., during a washdown.
Note
This device command has an immediate effect on the RM.
Disable Mouse
Disable the mouse of an RM/BTC.
Note
This device command has an immediate effect on the RM/BTC.
If the mouse is disabled on an RM/BTC, the mouse also cannot be used via session
shadowing.
Disable Keyboard
Disable the keyboard of an RM.
Note
This device command has an immediate effect on the RM.
If the keyboard is disabled on an RM, the keyboard also cannot be used via session
shadowing.
Maintenance Mode
Whenever data is sent from VisuNet CC to an RM/BTC, the RM/BTC asks the local operator if
the RM/BTC is allowed to enter maintenance mode. Maintenance mode is a semaphore that
establishes an exclusive communication link between VisuNet CC and the RM/BTC. When
maintenance mode is active, no local changes can be performed on the RM/BTC – either by a
local operator or by another Control Center.
51