Pepperl+Fuchs VisuNet Control Center 6 Manual page 61

VisuNet Control Center 6
Manage (Device)
Figure 7.43
6.
By clicking
7.
After selecting the required image click "Next".
8.
Check again the selected settings then click "execute" to perform the apply process.
Figure 7.44
9.
The apply process will take around 15 minutes. The system will reboot after the image(s) is/are
applied.
get detailed information about the selected Image and device.
Note
Applying this firmware will delete the complete Windows partition and you will
lose all settings. This cannot be undone.
61