Pepperl+Fuchs VisuNet Control Center 6 Manual page 64

VisuNet Control Center 6
Manage (Device)
a) Set your old computer name and upload the settings (we recommend this option, when your
devices haven't been configured).
Figure 7.48
If you set your old Computer Name and the same Network settings as earlier you can upload
the device settings via VisuNet CC to the RM Shell and return to the previous setting status of
the RM Shell. The settings of Third party software remains identical to the cloned settings.
With the Upload wizard the upload can be performed for multiple devices simultaneously.
b) Follow the clone wizard to configure multiple devices with your settings.
Figure 7.49
Use one device, either set it up or use one device within your network, as a predefined standard
and clone the settings to multiple other devices. See chapter 7.3 for further information on the
clone wizard.
Note
All devices need individual passwords which are required when executing the Clone Wizard.
The settings of Third party software remains identical to the cloned settings.
Capture Image Wizard
Use the Capture Image wizard to capture multiple images from multiple devices. The complete
Windows partition of the selected devices are captured as Image files.
For each Image about 7 GB storage are required in the Network share.
1.
Click "Next".
Figure 7.50
64