Pepperl+Fuchs VisuNet Control Center 6 Manual page 26

VisuNet Control Center 6
Manage (Home)
Firmware Update Wizard
The Firmware Update Wizard supports you in updating your latest version of the firmware e.g.
VisuNet RM Shell 6.0 to VisuNet RM Shell 6.1.
Note
The Firmware Update Wizard is not the right tool to upgrade VisuNet RM Shell 5 to VisuNet RM
Shell 6. Use the Quick Start Guide which is provided when purchasing the Upgrade Kit to get
further information.
Updating Firmware
Figure 6.13
1.
Select "Firmware Update File" and click "Open". You can find the latest available update on
www.pepperl-fuchs.com and download the Zip file.
2.
In step "Target devices", select required devices as described above. Double check if the right
devices are selected. Further devices can be added or removed from the selection. By clicking
, get detailed information about the selected device regarding communication status,
enabled or disabled Write Filter or if your installed versions are compatible and supported. If
your status has a red exclamation mark, follow the information provided.
26
Firmware Update Wizard: Select Update