Mounting More Battery Packs - Alpha ESS SMILE-S5 Manual

31
Mounting
2 3 4
1
2
T20
3Nm
M6*16(X6)
3
T20
2.5Nm
M4*12(X2)

5.5.2. Mounting more battery packs

You can install up to five extra batteries.
The steps for mount more expandable battery packs is as below. Expansion wiring
refer to chapter 6.7
If there are no expandable batteries to install, please ignore Chapter 6.3.2 and
•
skip to 6.3.3.
a. Remove the wall bracket from the battery pack.
b. Take out the expandable brackets and the battery wall bracket, then fix them
together with four M4 flange nuts (tools: SW7 sleeve, torque: 1.6 Nm).
c. Use four M4 flange nuts to fix the wall bracket assembled in the step 1 to the wall
bracket of SMILE-S5/B5.
d. Mark the positions according to holes on the bracket and remove the assembled
wall bracket.
e. Drill 6 holes on the wall with Φ10mm drill and insert 6 screw anchors into the drill
holes.
f. Perform action step c.
g. Attach the wall bracket to the wall and tighten the screws
h. Hold the handles on both sides of the battery pack and install it on the wall bracket.
This step should take two people to complete.
i. Tighten the wall bracket and the expandable battery with screw M6*16 (X4) (tool:
T20 screwdriver, torque: 3.0 Nm).