Installer Account Register and Install New System
The safety standard must be set correctly
If you select a safety standard which is not valid for your country and purpose, it
can cause a disturbance in the energy storage system and lead to problems with
the grid operator. When selecting the safety standard, you must always observe the
locally applicable regulations and directives as well as the properties of the PV
system (e.g. PV system size, grid-connection point).
If you are not sure which safety standard is valid for your country or purpose,
•
contact your grid operator for information on which safety standard is to be
configured.
If there is a WiFi module, please choose "Including WiFi Module" as "Yes", the APP
will jump to the WiFi configuration page, and please refer to section 9.3.
7.2. Register on AlphaCloud
7.2.1. Register as Installer Account
You can create a new account on our webserver for the normal monitoring. In
addition, a part of our warranty is based on this connection to our webserver. The
data produced prior to registration can be synchronized to the webserver.
Step1:Please use the following steps: Open the portal: www.alphaess.com.
Step2:Please fill in "Username", "Password" and click "Login" if you have already
registered.
If not, please register by filling in the following web form;
55