Powering On And Off The Product; Powering On The Product; Powering Off The Product - Alpha ESS SMILE-S5 Manual

Energy storage system
Hide thumbs Also See for SMILE-S5:
Table of Contents

Advertisement

Powering On and Off the product

58
8. Powering On and Off the product

8.1. Powering on the Product

Procedure
1) Switch on the battery breaker at right side of the battery.
2) Switch on the battery breaker located at the middle left of the energy storage
inverter.
3) Press the power button of the battery, if there are more than one battery, the
button for each battery should be pressed within 5 seconds of the previous one.
4) Switch on the AC breaker between the grid port of the inverter and the grid.
5) Switch on the AC breaker between the backup port of the inverter and the loads.
6) Switch on the PV switch on the left side of the inverter.
7) Switch on the PV switch between the PV string and the inverter if there is any.

8.2. Powering off the Product

After the energy storage system is powered off, the remaining electricity and heat
may still cause electric shocks and body burns. Therefore, put on protective gloves
and operate the product 5 minutes after the power-off.
Procedure
1) Switch off the AC breaker between the energy storage inverter and the load.
2) Switch off the PV switch at the upper left of the energy storage inverter.
3) Switch off the PV switch between the PV string and the energy storage inverter if
there is any.
4) Long press the power button of the battery for 6 seconds, and then switch off the
battery breaker located at right side of the battery.
5) Switch off the battery breaker located at the middle left of the energy storage
inverter.
6) Switch off the AC breaker between the energy storage inverter and the grid.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smile-b5

Table of Contents