Mounting; Requirements For Mounting - Alpha ESS SMILE-G3-S5 Manual

MOUNTING

06 Mounting

6.1 Requirements for Mounting

WARNING
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires.
Do not mount the product in areas containing highly flammable materials or gases.
Do not mount the product in potentially explosive atmospheres.
Basic Requirements
SMILE-G3-S5-INV, SMILE-G3-S3.6-INV, SMILE-G3-B5-INV,
suitable for indoor and outdoor use.
SMILE-G3 cannot use for multiple phase combinations
Do not install the inverter in a place where a person can easily touch because its
housing and heatsink are hot during operation.
Do not mount the product in areas with flammable or explosive materials. Do not
mount the product at a place within children's reach.
Do not mount the product outdoors in salt areas because it will be corroded and may
cause fire. A salt area refers to the region within 500m from the coast or prone to
sea breeze. The regions prone to sea breeze vary depending on weather conditions
(such as typhoons and monsoons) or terrains (such as dams and hills).
Mounting Environment Requirements
The product must be mounted in a well-ventilated environment to ensure
good heat dissipation.
When mounted under direct sunlight, the power of the product may be
de-rated due to additional temperature rise.
Mount the product in a sheltered place or mount an awning over the
product. The optimal temperature ranges for the battery pack to operate
is from15 to 30℃. Do not expose or place near water sources like
downspouts or sprinklers.
If the battery pack is mounted in the garage, then ensure that it is above
the height of the vehicle bumper and door.
Mounting Structure Requirements
The mounting structure where the product is mounted must be fireproof.
Do not mount the product on flammable building materials.
Ensure that the mounting surface is solid enough to bear the weight load.
In residential areas, do not mount the inverter on drywalls or walls made of similar
materials which have a weak sound insulation performance. Because the noise
generated by the inverter is obvious.
SMILE-G3-BAT-10.1P
18
are