Oil Level Check - VETRON 5390 Instruction Manual

1
Maximum
Minimum
Check the oil level before starting!
NOTICE:
The handling and disposal of mineral oils is subject to legal regulation.
Deliver used oil to an authorized collection point.
Protect your enviornment. Take care not to spill oil.
INFO!
By tilting the machine during power on, a gravity sensor automatically switches the
machine into "BLOCKED MODE". This is noted on the display.
01. Tilt the machine to the back. The oil tank is located below the base plate.
02. If necessary, slightly pull the oil plug
03. Please use only oil types recommended by VETRON.
For e.g.: Oil PP 20 DAB 10
(Viscosity 40° C: 15 mm
(Can be ordered under the number: SuS 6436)
Or call the service hotline: +49 631 / 2014 - 460
WARNING!
Before all maintenance work: push the X-button at the machine head, the red light
illuminates showing the active "BLOCKED MODE", or turn the machine o .
Failure to comply produces a risk of injury in case of an unintentional machine
operation.
/s; Flashpoint: 150°)
2
WARNING!
Oil on the skin, or swallowed.
If you get oil on your skin, make sure you clean it o the skin thoroughly.
In case you should swallow the oil seek medical attention immediately.
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK
04. MAINTENANCE
1
and fi ll the tank up to the "max" marking.

02. OIL LEVEL CHECK

07/2018
29