Oil Level Check - VETRON 5300 Instruction Book

04. MAINTENANCE

02. OIL LEVEL CHECK

WARNING!
Before all maintenance work: push the X-button at the machine head, the red light
illuminates showing the active "BLOCKED MODE", or turn the machine o .
Failure to comply produces a risk of injury in case of an unintentional machine
operation.
Maximum
Minimum
Check the oil level before starting!
NOTICE:
The handling and disposal of mineral oils is subject to legal regulation.
Deliver used oil to an authorized collection point.
Protect your enviornment. Take care not to spill oil.
INFO!
By tilting the machine during power on, a gravity sensor automatically switches the
machine into "BLOCKED MODE". This is noted on the display.
01. Tilt the machine to the back. The oil tank is located below the base plate.
02. If necessary, slightly pull the oil plug
03. Please use only oil types recommended by VETRON.
E.g.: Oil PP 20 DAB 10
(Viscosity 40° C: 15 mm
(Can be ordered under the number: SuS 6436)
WARNING!
Oil on the skin, or swallowed.
If you get oil on your skin, make sure you clean it o the skin thoroughly.
In case you should swallow the oil seek medical attention immediately.
Or call the service hotline: +49 631 / 2014 - 460
07/2020
34
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
1
1
and fill the tank up to the "max" marking.
/s; Flashpoint: 150°)
2