Microphone; Using A Microphone - PIONEER DJ Serato DDJ-REV5 Instruction Manual

Microphone

Using a microphone

1 Connect a microphone to the [MIC 1] or [MIC 2] terminal.
• Microphone gain varies depending on the microphone you use. Before DJ, adjust the
sound level according to your microphone with the [ATT.] knob on the rear of the unit.
Read more: Connecting to the input terminals (page 36)
2 Slide the [OFF, ON, TALKOVER] selector switch to set the
microphone sound output.
3 Turn the [LEVEL 1] or [LEVEL 2] knob in the MIC section to
adjust the microphone volume level.
• Note that turning the knob too far clockwise outputs the sound at a high volume.
4 Turn the [EQ (HI, LOW)] knob to adjust the volume of each band.
5 Speak into the microphone.
118