Step-By-Step Connections - PIONEER DJ Serato DDJ-REV5 Instruction Manual

• Do not connect the [MASTER 1] terminals to a terminal that can supply phantom power.
• Use the [BOOTH] terminals for balanced output only. Connecting the terminals to
unbalanced inputs with a TRS-RCA conversion cable (conversion adapter) or TS cable,
etc. results in unwanted noises and/or poor sound quality.

Step-by-step connections

1 Connect headphones to one of the PHONES terminals on the
front panel.
2 Connect an output device such as a power amplifier to the
[MASTER 1] or [MASTER 2] terminals.
• To use a booth monitor, connect it to the [BOOTH] terminals.
3 Connect a PC/Mac to the unit with a USB cable.
4 Turn the PC/Mac on.
5 Connect the AC adapter to the unit.
6 Turn the unit on.
• The "Getting Windows ready" message may appear if you're using a PC (Windows).
Wait until the PC gets ready.
• If you use an input device such as a microphone or DJ player, turn the device on.
7 Turn on the device connected to the [MASTER 1] or [MASTER
2] terminals.
38
Connections