Adjusting the master sound volume
1 Turn the [MASTER LEVEL] knob to adjust the volume for the
master sound.
The master level indicator lights up when the master sound is output.
• When outputting sound from the speakers of a PC/Mac, adjust the volume of the speakers.
Adjusting the sound
1 Turn the [HI, MID, LOW] knobs to adjust the volume of each
band.
• The volume of a Stem/part is adjusted in Stems Level/part ISO mode.
Setting the crossfader curve
1 Turn the [CURVE] knob to set the crossfader curve.
• Set the [REVERSE] switch to [ON] to reverse the operating direction of the crossfader.
116
Audio output