Slicer Loop mode
A specified range is applied to the track and divided into 8 sections. The divided sections are
assigned to different Performance Pads.
Loop playback of the section assigned to a Performance Pad continues while you press the
Performance Pad.
• You can't use Slicer Loop with a track that doesn't have beatgrid set. For details on how to
set beatgrid, refer to the Serato DJ Pro software manual (page 6).
1 Press the [ROLL] button twice.
The unit switches to Slicer Loop mode.
2 Press the [PARAMETER 1 ] or [PARAMETER 1 ] button
while pressing the [SHIFT] button to specify the range
(DOMAIN) to divide into 8 sections.
• Each press of the button sets the domain as follows from the position where the
button is pressed:
— 2 beats
— 4 beats
— 8 beats
— 16 beats
— 32 beats
— 64 beats
• The 8 sections of a divided domain are assigned to the Performance Pads as follows:
Sections 1 to 8:
62
Serato DJ Pro