PIONEER DJ Serato DDJ-REV5 Instruction Manual page 13

STEMS button
7.
Turns Active Part mode on.
• Press once to turn the Mute setting on.
• Press twice to turn the Solo setting on.
Pad buttons (page 100)
8.
In Active Part mode, use the buttons to control the Vocal, INST, or Drums part.
In Deck Pads mode, use as the [PAD 1], [PAD 2], [PAD 3], [PAD 4] buttons.
— [VOCAL/PAD 1]: Press to turn mute on and off for the Vocal part when the Mute
setting is turned on in Active Part mode. Press to output only the Vocal part when the
Solo setting is turned on. Press again to output all parts.
Press while pressing the [STEMS] button to load the track from the other deck to the
one you're pressing buttons on. If you do this during playback, the playback position
will be matched. The deck you're pressing buttons on outputs only the Vocal part, and
the Vocal part on the other deck is muted.
— [MELODY/PAD 2], [BASS/PAD 3]: Press to turn mute on and off for the INST part
when the Mute setting is turned on in Active Part mode. Press to output only the INST
part when the Solo setting is turned on. Press again to output all parts.
Press while pressing the [STEMS] button to load the track from the other deck to the
one you're pressing buttons on. If you do this during playback, the playback position
will be matched. The deck you're pressing buttons on outputs only the INST part, and
the INST part on the other deck is muted.
— [DRUMS/PAD 4]: Press to turn mute on and off for the Drums part when the Mute
setting is turned on in Active Part mode. Press to output only the Drums part when the
Solo setting is turned on. Press again to output all parts.
Press while pressing the [STEMS] button to load the track from the other deck to the
one you're pressing buttons on. If you do this during playback, the playback position
will be matched. The deck you're pressing buttons on outputs only the Drums part, and
the Drums part on the other deck is muted.
DECK button
9.
Selects the deck to use.
• Press while pressing the [SHIFT] button to turn Dual Deck mode on and off.
10. Jog wheel
Turn the jog wheel when Vinyl mode is on to scratch.
• Turn the outer section of the jog wheel, or turn the top of the jog wheel when Vinyl
mode isn't turned on to adjust the playback speed (Pitch Bend).
• Turn the jog wheel while pressing the [SHIFT] button to cycle through tracks with
extra speed according to the rotation direction.
13
Part names