PIONEER DJ Serato DDJ-REV5 Instruction Manual page 11

12. SELECT button (page 71)
Press while pressing the [SHIFT] button to adjust the number of bars the Auto BPM
Transition will occur over.
• Press a pad button ([VOCAL/PAD 1], [MELODY/PAD 2], [BASS/PAD 3], [DRUMS/
PAD 4]) while pressing the [SELECT] button to turn mute on for the Stem assigned to
the button you press when Auto BPM Transition starts.
13. (Auto BPM Transition Start) button
Starts Auto BPM Transition (page 71).
14. SLIP button
Turns Slip mode on and off (page 72).
15. CENSOR button
Plays the loaded track in reverse (Slip Reverse) while you're pressing the button
(page 46).
• Press while pressing the [SHIFT] button to play a track in reverse. Reverse playback
continues even if you release the buttons. Press while pressing the [SHIFT] button
again to return to normal playback.
• Maintaining reverse playback from one track to the next isn't possible.
• You may not be able to scratch if you start loop playback, etc. during reverse
playback.
16. KEY -, KEY + buttons
Adjusts the key (page 48).
• Press the [KEY -] button while pressing the [SHIFT] button to match the key of the
track on the deck with the key of the track loaded on the other deck (Key Sync).
• Press the [KEY +] button while pressing the [SHIFT] button to reset the key of the
track on the deck to its original key (Key Reset).
17. Deck Pads mode buttons
Turns on the pad mode assigned to the pressed button (page 66).
18. JOG FEEL knob
Adjusts the 'weight' of the jog wheel.
• Turn clockwise to increase the weight and counterclockwise to decrease it.
19. CUE button
Sets, plays from, or calls up a cue point.
• Press during pause to set a cue point.
• Press during playback to return to a cue point and pause (Back Cue).
11
Part names