PIONEER DJ Serato DDJ-REV5 Instruction Manual page 14

• Do not place anything on it or apply strong force.
11. Tempo slider
Adjusts the playback speed of a track.
• To the [+] side: Increases the playback speed.
• To the [-] side: Decreases the playback speed.
12. SELECT button (page 102)
Press while pressing the [SHIFT] button to adjust the number of bars the Auto BPM
Transition will occur over.
• Press a pad button ([VOCAL/PAD 1], [MELODY/PAD 2], [BASS/PAD 3], [DRUMS/
PAD 4]) while pressing the [SELECT] button to turn mute on for the part assigned to
the button you press when Auto BPM Transition starts.
(Auto BPM Transition Start) button
13.
Starts Auto BPM Transition (page 102).
14. SLIP button
Turns Slip mode on and off (page 104).
15. CENSOR button
Plays a track in reverse while you're pressing the button. Normal playback continues in
the background during reverse playback, but you can't hear this. If you release the button,
normal playback starts from the exact point the track would have reached by then.
• Press while pressing the [SHIFT] button to play a track in reverse. Reverse playback
continues even if you release the buttons. Press while pressing the [SHIFT] button
again to return to normal playback.
16. KEY -, KEY + buttons
Adjusts the key.
• Press the [KEY -] button to lower the key of the track playing on the deck by a
semitone.
• Press the [KEY +] button to raise the key of the track playing on the deck by a
semitone.
• Press the [KEY -] button while pressing the [SHIFT] button to match the key of the
track on the deck with the key of the track loaded on the other deck (Key Sync).
• Press the [KEY +] button while pressing the [SHIFT] button to reset the key of the
track on the deck to its original key (Key Reset).
17. Deck Pads mode buttons
Turns on the pad mode assigned to the pressed button (page 100).
14
Part names