PIONEER DJ Serato DDJ-REV5 Instruction Manual page 54

• Normal playback continues with its original rhythm in the background during Loop
Roll playback, but you can't hear this.
• Release the Performance Pad to end Loop Roll playback. Normal playback starts from the
exact point the track would have reached by then.
Saved Loop mode
You can save a loop to a loop slot in Serato DJ Pro and call up the saved loop.
• You can also use the Deck Pads (pad buttons) to control Saved Loop mode (page 68).
1 Press the [SAVED LOOP] button.
The unit switches to Saved Loop mode.
2 Press a Performance Pad during loop playback.
Loops are assigned to the loop slots in Serato DJ Pro as follows:
Slot 1 Slot 2
Slot 5 Slot 6
3 Press a Performance Pad assigned with a loop while pressing
the [SHIFT] button.
Loop playback starts from the beginning of the loop.
• Press the [PARAMETER 1
change the length of the loop that's playing. The setting of the loop is overwritten with
the new setting.
• Press the [PARAMETER 1
[SHIFT] button during loop playback to move a loop without changing the loop length.
The setting of the loop is overwritten with the new setting.
• Press the Performance Pad again to cancel loop playback.
Slot 3 Slot 4
Slot 7
Slot 8
] or [PARAMETER 1
] or [PARAMETER 1
] button during loop playback to
] button while pressing the
54
Serato DJ Pro