PIONEER DJ Serato DDJ-REV5 Instruction Manual page 9

• Press while pressing the [SHIFT] button to reset to the track's original speed
regardless of the Tempo slider's setting.
2X button
4.
Doubles the length of a loop (page 49).
• Press while pressing the [SHIFT] button to set a loop-out point (page 49).
• Press while pressing the [SHIFT] button during loop playback to adjust a loop-out
point (page 50).
• Press during Loop Roll playback to change the number of beats for the Loop Roll
(page 53).
1/2X button
5.
Halves the length of a loop (page 49).
• Press while pressing the [SHIFT] button to set a loop-in point (page 49).
• Press while pressing the [SHIFT] button during loop playback to adjust a loop-in point
(page 50).
• Press during Loop Roll playback to change the number of beats for the Loop Roll
(page 53).
AUTO LOOP button
6.
Plays a loop of the specified number of beats or starts Auto Beat Loop (page 49).
• Press while pressing the [SHIFT] button to turn Loop Active on and off.
• You can choose whether the [AUTO LOOP] button starts a loop of the specified
number of beats or starts Auto Beat Loop in [LOOP options.] in Setting Utility
(page 34).
STEMS button
7.
Turns Stems mode on.
• Press once to turn the Mute setting on.
• Press twice to turn the Solo setting on.
Pad buttons
8.
In Stems mode, use as the [VOCAL], [MELODY], [BASS], [DRUMS] buttons.
In Deck Pads mode, use as the [PAD 1], [PAD 2], [PAD 3], [PAD 4] buttons.
— [VOCAL/PAD 1]: Press to turn mute on and off for the Vocal Stem when the Mute
setting is turned on in Stems mode. Press to output only the Vocal Stem when the Solo
setting is turned on. Press again to output all Stems.
Press while pressing the [STEMS] button to load the track from the other deck to the
one you're pressing buttons on. If you do this during playback, the playback position
will be matched. The deck you're pressing buttons on outputs only the Vocal Stem, and
the Vocal Stem on the other deck is muted.
9
Part names