Fader Start - PIONEER DJ Serato DDJ-REV5 Instruction Manual

• Press the [ AUTO LOOP ] button to cancel loop playback and start normal playback
from the exact point the track would have reached by then.
Read more: Setting a loop automatically (page 85), Setting a loop manually (page 85)
• Press the [SLIP] button again to turn Slip mode off.

Fader Start

You can start playback by moving the fader knobs.
Using Channel Fader Start
1 Select [CUE] in [Fader Start options.] on the [PREFERENCES]
tab in Setting Utility.
Read more: Changing the settings (page 33)
2 Pause playback at the point you start playback.
3 Press the [CUE] button on the deck you want to play a track.
A cue is set.
4 Move the channel fader up from the bottom position while
pressing the [SHIFT] button.
Playback of the track starts from the cue point.
• Move the channel fader back to the bottom position while pressing the [SHIFT] button
during playback to quickly return to the cue point and pause playback (Back Cue).
• If a cue isn't set in step 3, playback starts from the current position of the track.
107
rekordbox