PIONEER DJ Serato DDJ-REV5 Instruction Manual page 21

10. MASTER LEVEL knob
Adjusts the volume for the master sound output to the [MASTER 1] or [MASTER 2]
terminals.
11. BOOTH LEVEL knob
Adjusts the volume for the sound output to a booth monitor.
12. Performance Pads (page 87)
13. CLIP indicator
Blinks when excessive volume is output from the [MASTER 1] or [MASTER 2] terminals.
CUE button
14.
Adjusts the volume for the sound output from the PHONES terminals in EQ mode.
— [CH 1]: Outputs the sound of CH 1 and/or CH 3.
— [CH 2]: Outputs the sound of CH 2 and/or CH 4.
• Press while pressing the [SHIFT] button to switch between EQ mode and Part ISO
mode.
15. Master level indicator
Displays the volume level of the master sound output to the [MASTER 1] and [MASTER
2] terminals.
16. Crossfader
Adjusts the volume balance between the channel output sounds according to the
crossfader curve specified with the [CURVE] knob (page 25). Moving it to the Deck 1
(left) side outputs the sound of Deck 1, and to the Deck 2 (right) side outputs the sound of
Deck 2.
21
Part names