Table of Contents
Advertisement
Setting item
LOOP options.
PAD MODE options.
Fader Start options.
Set the range where sound
won't be output at both
sides of the crossfader.
Settings to output audio
data to PC/Mac
Description
When using the unit with Serato DJ Pro, mark the check
box to activate the loop length set by the slider.
Clear the check box to set the [AUTO LOOP] button on
the unit to work as the Auto Beat Loop button.
• For rekordbox, set this function from [Preferences]
on the rekordbox screen (page 111).
Mark the check box to enable Pad mode switching by
pressing a Pad mode button a few times in succession.
• When 2 computers (PC/Mac) are connected to the
unit and the input selector switches for CH 1 and CH
2 are set to the different computers, this setting will
be valid when it's enabled on each PC/Mac.
To enable the Fader Start function, select [CUE] or
[HOT CUE] from the pull-down list.
To enable Sync function for the Fader Start function,
mark the check box.
• The check box is valid when using Serato DJ Pro.
• Only Hot Cue A works when [HOT CUE] is selected.
• The [HOT CUE] setting doesn't work properly when
the [During Pause, GATE playback is applied.]
check box is marked in [Preferences] [Deck]
[Hot Cue] in rekordbox.
Read more: Fader Start (page 73), Fader Start
(page 107)
Use the slider to set the range where sound won't be
output at both ends of the crossfader.
Sets whether or not to output the microphone sound to
the recording channel ([WITH MIC]/[WITHOUT MIC]).
34
PC/Mac setup
Advertisement
Table of Contents
