PIONEER DJ Serato DDJ-REV5 Instruction Manual page 28

• Do not connect to a terminal that can supply phantom power.
MASTER 2 terminals (RCA)
3.
Connect to analog input terminals on a power amplifier, etc.
• Use the [MASTER 2] terminals for unbalanced input (RCA, etc.).
BOOTH terminals (1/4"/6.35 mm, TRS) (page 117)
4.
Connect a booth monitor.
• Use the terminals for balanced output only. Connecting the terminals to unbalanced
inputs results in unwanted noises and/or poor sound quality.
USB ports (page 36)
5.
Connect a PC/Mac.
AUX terminals (pages 36, 119)
6.
Connect a line-level output device.
MIC 2 terminal (1/4"/6.35 mm, TRS) (pages 36, 118)
7.
ATT. knob (page 118)
8.
Adjusts the sound level input to the [MIC 1] and [MIC 2] terminals.
• Microphone gain varies depending on the microphone you use. Adjust the sound
level according to your microphone before using it.
To adjust the microphone volume during a performance, use the [LEVEL 1] or
[LEVEL 2] knob in the MIC section on the front panel (page 24).
MIC 1 terminal (XLR or 1/4"/6.35 mm, TRS) (pages 36, 118)
9.
button
10.
Turns the unit on ( ) and off ( ).
11. DC IN terminal
Connect to a power outlet with the supplied AC adapter and power cord (page 36).
28
Part names