PIONEER DJ Serato DDJ-REV5 Instruction Manual page 20

16. Crossfader
Adjusts the volume balance between the channel output sounds according to the
crossfader curve specified with the [CURVE] knob (page 25). Moving it to the Deck 1
(left) side outputs the sound of Deck 1, and to the Deck 2 (right) side outputs the sound of
Deck 2.
 When using rekordbox
TRIM knob
1.
Adjusts the volume for the channel input sound.
FILTER knob
2.
Adjusts a filter or an effect.
3. PARAMETER 1 ,  buttons
Sets the parameters.
Pad mode buttons
4.
Turns on the pad mode assigned to the pressed button (page 87).
SAMPLER VOLUME knob
5.
Adjusts the sampler volume.
Channel fader
6.
Adjusts the volume for the channel output sound. Moving it up increases the volume, and
down decreases the volume.
Channel level indicator
7.
Displays the volume level before the sound passes through the channel fader.
Input selector switch
8.
Selects an input sound source.
— [ A] : Selects a PC/Mac connected to the [USB A] terminal.
— [ B] : Selects a PC/Mac connected to the [USB B] terminal.
HI, MID, LOW knobs
9.
Adjusts the volume of each frequency band in EQ mode.
Adjusts the volume of each part in Part ISO mode.
— [HI]: Adjusts the volume of the Vocal part.
— [MID]: Adjusts the volume of the INST part.
— [LOW]: Adjusts the volume of the Drums part.
20
Part names