PIONEER DJ Serato DDJ-REV5 Instruction Manual page 19

Channel fader
6.
Adjusts the volume for the channel output sound. Moving it up increases the volume, and
down decreases the volume.
7. Channel level indicator
Displays the volume level before the sound passes through the channel fader.
Input selector switch
8.
Selects an input sound source.
— [ A] : Selects a PC/Mac connected to the [USB A] terminal.
— [ B] : Selects a PC/Mac connected to the [USB B] terminal.
9. HI, MID, LOW knobs
Adjusts the volume of each frequency band in EQ mode.
Adjusts the volume of each Stem in Stems Level mode.
— [HI]: Adjusts the volume of the Vocal Stem.
— [MID]: Adjusts the volume of the Melody and Bass Stems.
— [LOW]: Adjusts the volume of the Drums Stem.
10. MASTER LEVEL knob
Adjusts the volume for the master sound output to the [MASTER 1] or [MASTER 2]
terminals.
11. BOOTH LEVEL knob
Adjusts the volume for the sound output to a booth monitor.
12. Performance Pads (page 51)
13. CLIP indicator
Blinks when excessive volume is output from the [MASTER 1] or [MASTER 2] terminals.
CUE button
14.
Selects the sound output to the PHONES terminals in EQ mode.
— [CH 1]: Outputs the sound of CH 1 and/or CH 3.
— [CH 2]: Outputs the sound of CH 2 and/or CH 4.
• Press while pressing the [SHIFT] button to switch between EQ mode and Stems
Level mode.
15. Master level indicator
Displays the volume level of the master sound output to the [MASTER 1] and [MASTER
2] terminals.
19
Part names