PIONEER DJ Serato DDJ-REV5 Instruction Manual page 53

Roll mode
Loop Roll playback continues according to the number of beats assigned to a Performance
Pad while you press the pad.
1 Press the [ROLL] button.
The unit switches to Roll mode.
2 Press the [PARAMETER 1 ] or [PARAMETER 1 ] button.
The numbers of beats assigned to Performance Pads change as follows each time the
button is pressed:
— 1/32 to 4 beats
— 1/16 to 8 beats
— 1/8 to 16 beats
— 1/4 to 32 beats
Example: When set to 1/8 to 16 beats, the numbers of beats are assigned to the
Performance Pads as follows:
1/8 1/4
2 4
The numbers of beats are displayed on the Serato DJ Pro screen.
3 Press the Performance Pad assigned with the number of
beats you want to play in a loop.
Loop Roll playback continues according to the number of beats assigned to the
Performance Pad until you release the pad.
• Press the [1/2X] or [2X] button during Loop Roll playback to change the number of
beats in Loop Roll being played.
1/2 1
8 16
53
Serato DJ Pro