Adjusting The Sound - PIONEER DJ Serato XDJ-RX3 Instruction Manual

Adjusting the channel output volume
1 Move the channel fader to adjust the volume for the output
sound.
2 Move the crossfader to adjust the volume balance of the two
channels.
• You don't need to adjust the crossfader when the [CROSSFADER CURVE] switch is
set to [THRU].
Adjusting the master sound volume
1 Turn the [MASTER LEVEL] knob to adjust the volume for the
master sound.
The master level indicator lights up when the master sound is output.

Adjusting the sound

1 Turn the [EQ/ISO (HI, MID, LOW)] knobs to adjust the volume
of each band.
• Set the function (equalizer or isolator) to adjust with the [EQ/ISO (HI, MID, LOW)] knobs in
[EQUALIZER CURVE] in the Utility settings or on the [SHORTCUT] screen (pages 115,
119).
88
Audio output