Fader Start; Using Fader Start - PIONEER DJ DJM-S11 Instruction Manual

Fader Start

You can start playback by moving the fader knobs.

Using Fader Start

To use the Fader Start function, mark the check box of [Fader Start options.] on the
[PREFERENCE] tab in Setting Utility or in the Utility settings on the unit.
Read more: Changing the settings (page 22)
Using Channel Fader Start
1 Set a cue.
• To find out how to set a cue point, refer to the user manual for your DJ software.
• You can set a cue by moving the channel fader to the bottom position while pressing
the [SHIFT] button when a track is paused.
2 Move the channel fader up from the bottom position while
pressing the [SHIFT] button.
Playback of the track starts from the cue point.
• Move the channel fader back to the bottom position while pressing the [SHIFT] button
during playback to quickly return to the cue point and pause playback (Back Cue).
• If a cue is not set, playback starts from the beginning of the track.
• You can set whether the sync function will turn on when Channel Fader Start is
triggered (only for use with Serato DJ Pro) on the [PREFERENCE] tab in Setting
Utility (page 22).
• Move the channel fader to the bottom position while pressing the [SHIFT] button
during cue standby to start playback from the cue point.
98