Installing The Lower Triple Clamp - GAS GAS MC 450F 2022 Owner's Manual

11.12

Installing the lower triple clamp

(MC 450F TROY LEE DESIGNS)
–
Open cable holder
ness.
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp and handlebar and set it aside.
Info
Cover the components to protect them against damage.
S05130-10
Do not kink the cables and lines.
–
Remove O-ring
–
Remove protective ring
–
Remove the lower triple clamp and steering stem.
–
Remove the upper steering head bearing.
A00800-10
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing.
–
Check that the O-ring at the top
–
Slide on protective ring
B01605-10
(All standard models)
–
Position the upper triple clamp and handlebar.
–
Mount screw
A00802-10
SERVICE WORK ON THE CHASSIS 11
1
on the left and detach the wiring har-
2
.
3
.
4
.
5
.
p. 146)
1
is correctly positioned.
2 3
and O-ring .
4
, but do not tighten it yet.
55