Table of Contents
Advertisement
16.5
Adjusting the idle speed
Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized GASGAS Motorcycles workshop will be glad to help.)
16.6
Programming the throttle valve position
Info
If the control unit detects that the throttle valve position at idle speed needs to be reprogrammed, then the mal-
function indicator lamp flashes 2x per second.
Activating ADVANCED mapping:
–
Press button MAP until LED 2 lights up.
Guideline
Engine speed
ADVANCED – direct response
H02886-01
–
Run the engine until warm.
The cold start button is deactivated – The cold start button is in
its basic position. (
Danger
Danger of poisoning Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
–
Set the idle speed by turning idle speed adjusting screw
Guideline
Idle speed
Tachometer (45129075000)
Info
A00884-10
Turning counterclockwise lowers the idle speed.
Turning clockwise raises the idle speed.
TUNING THE ENGINE 16
< 4,000 rpm
p. 18)
1
2,100 ... 2,200 rpm
.
117
Advertisement
Table of Contents
